Modular OLT
- 17 service slots
- Up to 272 GPON / XG-PON / XGS-PON ports
- Dual-backup DC power

Reference chassis image. Installed boards and supplied configuration must be confirmed in the quotation.
A 2-service-slot optical line terminal for FTTH access and service aggregation. Select the boards, optical modules, uplinks and power configuration for your network.
Based on Product Datasheet, Issue 08 (2023-06-29). Confirm the configuration offered for your order.
| Model | MA5800-X2 |
|---|---|
| Service slots | 2 |
| Backplane | H901BPSB |
| Control board slot numbers | 3, 4 |
| Service / upstream board slot numbers | 1–2 |
| Universal interface board slot | Not supported |
| Power board slot numbers | 0 |
| Compatible cabinets | N63E-22 |
| Dimensions W × D × H, excluding mounting ears | 442 × 268.7 × 88.1 mm |
| Dimensions W × D × H, including IEC mounting ears | 482.6 × 268.7 × 88.1 mm |
| Dimensions W × D × H, including ETSI mounting ears | 535 × 268.7 × 88.1 mm |
| Maximum weight, including mounting brackets | 9.4 kg |
| Power configuration | DC with dual backup; AC with battery backup option |
| DC operating voltage range | −38.4 V to −72 V |
| Rated DC voltage | −48 V / −60 V |
| Maximum DC input current | 20 A |
| AC operating voltage range, AC configuration | 100–240 V |
| Rated AC voltage | 110 V / 220 V |
| Maximum AC input current | 8 A |
| Maximum GPON access ports, configuration-dependent | 32 |
| Maximum XG-PON access ports, configuration-dependent | 32 |
| Maximum XGS-PON access ports, configuration-dependent | 32 |
| Maximum GE access ports, configuration-dependent | 96 |
| Maximum 10GE access ports, configuration-dependent | 16 |
| Control board payload switching capacity, load-sharing mode | MPSA/MPSG: 248 Gbit/s; MPSD: 560 Gbit/s |
| Maximum payload bandwidth per service slot, load-sharing mode | MPSA/MPSG: 40 Gbit/s; MPSD: 100 Gbit/s |
| Upstream interfaces using dual control boards | MPSA/MPSG: 4 × 10GE/GE + 4 × GE; MPSD-G: 8 × 10GE/GE |
| Operating temperature | −40 °C to +65 °C |
| Lowest startup temperature | −25 °C |
| Ambient humidity | 5%–95% RH |
| Atmospheric pressure | 70–106 kPa |
| Altitude | < 4000 m; allowable operating temperature depends on altitude |
Port counts are chassis maxima for the selected technology and compatible service boards, not simultaneous totals or a standard delivery configuration. Switching capacity and uplink figures depend on the control board; figures above use load-sharing mode or dual control boards where stated. Confirm hardware, optical modules, software release, licenses and ONU/ONT interoperability before ordering.
The +65 °C limit is measured at the air intake of the service subrack. Startup is specified down to −25 °C, which differs from the −40 °C operating limit. At higher altitude, confirm the permitted temperature and cooling conditions for the installation.
The product description lists this chassis from V100R017C10 onward; individual functions may require later software.
Send the required PON technology, subscriber count, split ratio, fiber reach, uplink capacity, rack dimensions, site power and redundancy requirements. Specify the ONU/ONT models already in use so compatibility can be checked for the proposed software and boards.
Compare chassis capacity; boards and power assemblies are not assumed interchangeable.
Confirm the warranty scope and service procedure in your quotation.
Regular models are available from stock. Confirm the exact model and current stock with sales before ordering.
Production through factory dispatch typically takes about one week, subject to confirmation for your specific order.
Transit time depends on the shipping method and destination. Shipping is arranged according to customer requirements; confirm the method and estimate with sales.
We can communicate in your language and help confirm specifications and order details before purchase.